MOUNTAIN RAISE EXCAVATOR maintenance method
The purpose of maintenance of the MOUNTAIN RAISE Excavator model is to extend the service life and avoid accidental wear. Therefore, maintenance work must run through daily production work and become an important part of production.
The maintenance of the excavator model includes three specific contents: inspection, cleaning, and lubrication. Next, we will teach you 8 maintenance techniques for excavator model maintenance!
The maintenance content of MOUNTAIN RAISE EXCAVATOR:
1. For newly installed excavators, all parts must be filled with oil before trial operation, and the lubrication conditions must be checked in shifts during work; for excavators that have been out of service for a long time, the original old dry oil must be used before use Squeeze it all out.
2. During the operation of the excavator, pay attention to the operation of each motor of the excavator, the mechanical transmission of the excavator and whether there are any abnormalities in the braking system, control system, cooling fan, lighting and signals, etc., and various problems in the inspection Find out and deal with it in time;
3. Good lubrication can reduce mechanical wear and failure during operation. The lubrication work must be carried out in strict accordance with the time limit, oil quantity and lubricating oil type specified in the excavator manual;
4. Frequent cleaning and wiping is not only good for early detection of various faults, but also can improve the operating conditions of the excavator driver and prolong the service life of the excavator;
5. All mechanical and electrical parts of the excavator must be kept clean to prevent dust and foreign objects from entering the interior;
6. When filling oil, pay attention to keeping the excavator's lubricating oil path clean to prevent dust and impurities from mixing into the excavator;
7. Check the lubrication system of the excavator frequently to ensure that the oil circuit of the excavator is unblocked;
8. When the excavator is stopped, carefully check whether the anchor screws and bearing shell screws of the excavator are loose, the meshing and lubrication of the gears, and the bearings, power units, control systems, brakes, reduction boxes, and track shoes. , Basic parts, cables, wire ropes, bucket teeth and other parts have abnormal wear and tear;
